Fiery EX12 Configuration Manual page 15

1
1-3 Stages of installation on the network
C
ONNECTION
S
ERVER CONFIGURATION
F
IERY SETUP
C
LIENT SETUP
UNIX
Summary of Fiery network installation
Fiery
Network server
Fiery
Mac OS Windows
Fiery available on the network
Prepare a network node. Connect the Fiery to the
copier/printer and the network. If you use a
computer running Command WorkStation software,
connect it to the network.
Configure UNIX, Windows NT 4.0, and IPX (Novell)
servers to specify Fiery print queues and Fiery
users.
No special configuration of AppleShare servers is
required.
On the Fiery Control Panel, configure, at a
minimum, the Server Setup, Network Setup, and
Printer Setup. After the initial Setup, you can
configure the remaining Setups from the Control
Panel or Command WorkStation.
At each computer from which users print to
the Fiery:
• Install the appropriate printer files and connect
to one or more queues.
• Install Fiery utilities and an Internet browser for
those computers that will use them.
• Verify the Fiery in the list of printers and run a
test print.