Fiery EX12 Configuration Manual page 145

5
5-39 Network Setup
Outgoing Mail Server
appropriate mail server and contact information to the Fiery.
Both an Incoming and Outgoing mail server must be defined. If an Outgoing
N :
OTE
mail server is not defined, the Fiery e-mail service assumes that the incoming and
outgoing server names are the same.
Timeout (seconds)
attempts to connect to the mail server.
Polling Interval
e-mail.
Attachment Maximum Size
send as an attachment. If the scan file exceeds this maximum, the file will automatically
be sent as a URL.
Mailbox Account Name
This name tells the Fiery client mail service which account contains e-mail messages
for the Fiery.
The account name entered in this field must first be specified on the mail server
N :
OTE
by the administrator.
Fiery E-mail Address
pat@test.com
—Enter a password for accessing the mailbox account on the mail server.
Password
Verify Password
Administrator E-mail Address
The administrator authorizes a unique e-mail address to remotely administer Fiery
e-mail services. If an error occurs while you are executing a scan to e-mail, the e-mail
service sends an error message to the Administrator E-mail Address specified. The
administrator can authorize additional administrator e-mail addresses from this e-mail
address.
—Specify the IP address or server name that communicates the
—Specify the maximum amount of time that will elapse as the Fiery
—Specify how often the Fiery checks the mail server for relevant
—Specify the maximum file size of a scan for the Fiery to
—Enter the mailbox name specified on the mail server.
—Enter the name of the e-mail account. For example,
.
—Reenter your password.
—Enter the user name specified in Fiery setup.