Chapter 6: Configuring Fiery Webtools; Configuring The Fiery And Clients For Fiery Webtools - Fiery EX12 Configuration Manual

6
6-1 Configuring the Fiery and clients for Fiery WebTools
Chapter 6:
Configuring
Fiery WebTools
T
O SET UP
1. In Fiery Network Setup, enable TCP/IP.
2. Set a valid, unique IP address for the Fiery, and then set the subnet mask.
3. Enable Web Services.
4. In Fiery Printer Setup, confirm the that Print Queue is published.
T
O SET UP
1. Enable TCP/IP networking.
2. Assign the workstation a valid, unique IP address and subnet mask, and a gateway
3. Install an Internet browser that supports the Java language and frames.
Fiery WebTools allow you to manage your Fiery remotely from the Internet or from
your company's intranet. The Fiery has its own home page, from which you can select
a variety of functions, including Status, WebSetup, WebSpooler, WebLink, Installer,
WebScan (Fiery EX12 only), and WebDownloader.
For more information on using Fiery WebTools, see the
Configuring the Fiery and clients for Fiery WebTools
The Fiery WebTools provide access to many Fiery functions via the Internet (or
intranet), providing additional flexibility in remote management. You can access
the Fiery WebTools from a Windows or Mac OS computer.
F W T
IERY EB OOLS ON THE
Set a gateway address, if required.
F W T
IERY EB OOLS ON A COMPUTER
address, if required.
Make sure Java is enabled. For more information on supported browsers and
Fiery WebTools requirements, see the
F
IERY
User Software Installation
Printing Guide.
Guide.