Setting Passwords - Fiery EX12 Configuration Manual

7
7-2 Administering the Fiery
For these operations
Getting users started with
printing
Controlling the job flow
Job accounting
Color management
Maintaining optimal Fiery
performance
Troubleshooting
And these tasks
Printing to the Fiery
Setting job-specific options
Using Fiery utilities
Using Fiery WebTools, Command WorkStation and Fiery
utilities and for managing job priorities, tracking current
jobs, canceling jobs, printing jobs in the Hold queue, and
reprinting from the Printed or Hold queue
Viewing, printing, and exporting the Job Log, user notes
Setting automatic printing and clearing for the Job Log
Printing with CMYK simulations
Printing color samples and swatch pages
Installing color profiles
Tips
Deleting jobs, clearing queues
Troubleshooting Fiery Setup

Setting passwords

You can set or change the Administrator password for the Fiery. Anyone with the
Administrator password can modify the Setup options, and control the flow and order
of print jobs with the job management tools.
When the Fiery is installed, there is no password. If you do not create an
Administrator password, users are not required to enter a password to modify the
Setup or use the administrator functions in the job management tools. If an
Administrator password has been set previously, you are required to enter it when you
run Setup. Use the Up and Down arrow buttons to select the characters and the Left
and Right arrow buttons to move between them (see
page 4-10).
See
Printing Guide
Job Management Guide
Printing Guide
Job Management Guide
Release Notes
Job Management Guide
page 5-6
Color Guide
User Software Installation
Guide
page 7-10, also
Job Management Guide
Appendix B
"Types of Setup screens" on