Setting Up Fiery Webtools - Fiery EX12 Configuration Manual

6
6-2 Configuring Fiery WebTools
T F W T
O ACCESS IERY EB OOLS
1. Start your Internet browser.
2. Enter the IP address or DNS name of the Fiery.
3. Press Enter.
The Fiery home page appears.
4. Click the name of a particular WebTool.
5. Click Configure to enable specific WebTools for users.

Setting up Fiery WebTools

In order for network users to access and use Fiery WebTools, you must set certain Fiery
options in Network Setup and Printer Setup. You also must prepare each user's
workstation to communicate with the Fiery over the Internet or intranet.
For more information about Network Setup, see
T F W T
O SET UP IERY EB OOLS ON THE
1. Set Enable Ethernet to Yes in Network Setup>Port Setup>Ethernet Port Setup.
2. Set Enable TCP/IP for Ethernet to Yes in Network Setup>TCP/IP Ethernet Setup.
3. Set Enable Web Services to Yes in Network Setup >Network Service Setup>
Web Services Setup.
4. Exit Network Setup, and choose OK to Save Changes.
5. Exit Printer Setup, and choose OK to Save Changes.
Chapter
F
IERY
2.