5
5-8 Setting up the Fiery from a Windows Computer
Ethernet (Port Setup)
Enable Ethernet
Transmission Speed
choose the speed of the network to which the Fiery is attached (10 Mbps or 100
Mbps).
Token Ring (Port Setup)
Enable Token Ring
Maximum Frame Size
network administrator at your site. If you are uncertain of the setting to use, select the
default value (4202).
Transmission Speed
choose the speed of the network to which the Fiery is attached (4 Mbps or 16 Mbps).
Enable Source Routing
Request All Routes
Specify whether you want the Request packet to travel to its destination by all routes.
Respond All Routes
Select if you want the Response packet to return by all routes to the originating
computer.
—Select if the Fiery is to be connected to an Ethernet network.
—Chose Auto Detect if your network environment is mixed, or
—Select if the Fiery is connected to a Token Ring network.
—Choose the maximum frame size recommended by the
—choose Auto Sense if your network environment is mixed, or
—Select if your network supports source routing.
—This option is active only if you select enable Source Routing.
—This option is available only if the previous option is cleared.