Accessing Setup Options - Fiery EX12 Configuration Manual

4
4-8 Performing Setup from the Control Panel
T S
O ACCESS
1. Make sure the information screen on the Control Panel reads Idle.
2. Press the Menu button on the Control Panel to go to the Functions menu.
3. Scroll with the Down arrow button and press the line selection button next to Run
4. When prompted, confirm your choice to proceed to Setup.
5. Press the line selection button to choose a Setup menu or command.
Exit Setup
Server Setup
Network Setup
Printer Setup
Setup
6. Perform Server Setup, Network Setup, and Printer Setup, in that order.
PS Setup
Color Setup
Job Log Setup
Change Password 7. Set an Administrator password to protect your Setup from unauthorized changes.
Setup
Font Archiving
Setup

Accessing Setup options

F
ETUP WHEN THE IERY IS AT
If Printing or RIPping appears, the Fiery is processing, and you must wait until
the system finishes and reaches the Idle state.
Setup.
If an Administrator password has been set on the Fiery, you are prompted to enter
it before you can perform Setup (see
Use the Down arrow button to view the remaining screens of the main Setup
menu.
This is the minimum required for initial Setup. Later, you can complete the
remaining Setups, either from the Control Panel or a Windows computer.
Review the settings described in this chapter.
I
DLE
page 7-2).