Activity Light; Buttons - Fiery EX12 Configuration Manual

4
4-3 Fiery Control Panel

Activity light

The activity light indicates the current Fiery activity. If the light is:
Solid red
Flashing red
Solid green
Flashing green
No light

Buttons

Line selection
buttons
Up and Down
arrow buttons
Menu button
Power button
Reset button
An error has occurred, causing the Fiery to be disabled.
An error has occurred, causing printing to be disabled, but
the Fiery is capable of processing.
The Fiery is idle.
The Fiery is processing or printing a job, or communicating
with a remote computer.
The Fiery is off or starting up.
Use these buttons to select the command displayed on the
corresponding line of the display window. When a button is
active, a special character (>) appears in the display window
next to the button.
Use these buttons to scroll to different screens in
multi-screen lists, select Setup options from a list of available
options, and scroll through alphanumeric characters.
Press this button to view other screens. Under normal
operation, the Control Panel displays the Info, RIP, or Print
Status screen with information about the status of the Fiery.
If you press the Menu button, the Functions menu is
displayed and you can perform additional operations (see
page 4-6). If a job is processing or printing, press the Menu
button to cycle among the active screens.
Press this button to turn the Fiery on and off.
Press this button to restart the Fiery after you have selected
Shut Down System from the Shut Down menu.