Color Setup Options - Fiery EX12 Configuration Manual

4

4-47 Color Setup options

T C
O ACCESS
1. In the main Setup menu, choose Color Setup.
PS Setup
Color Setup
Job Log Setup 2. Enter the options appropriate to the printing requirements at the site.
Change Password
Setup
3. When you have finished, save changes.
Color Setup options
Color Setup allows you to set defaults the Fiery uses to control color output. Mac OS
and Windows users who use the printer drivers provided on the User Software CD can
override most of these defaults on a job-by-job basis. However, users printing from
UNIX or DOS command lines cannot override defaults from their applications.
Therefore, you must set defaults in Color Setup.
The preferred method for setting color defaults is to use Color Setup, part of the
ColorWise Pro Tools. The color options are described in this section for your
reference. For more information about these defaults, see the
Color Guide.
In addition to the defaults described in this section, Mac OS and Windows users
N :
OTE
have additional settings available from the printer drivers.
S
OLOR ETUP OPTIONS
In the list of options that follows, default values, where applicable, appear in square
brackets.
RGB Source Profile
EFIRGB/sRGB (PC)/Apple Standard/None [EFIRGB]
The RGB source is the color space used to control color for conversion from screen to
printed output. EFIRGB is based on the reference points used in the creation of the
Fiery software. sRGB is based on an average of a large number of PC monitors. Apple
Standard is the standard reference point for Apple's ColorSync software.
Printing Guide and