Fiery EX12 Configuration Manual page 29

2
2-5 Fiery on a TCP/IP network with Windows NT 4.0
Installing the Fiery as a shared printer
The first step in creating a printer is installing the printer driver files, which give your
applications access to printer features. You can use the installation instructions in the
User Software Installation Guide
independently to the Fiery. However, if you are an administrator running a
Windows NT 4.0 Server, Windows NT 4.0 Workstation, or Windows 2000
Professional computer, you can also create a printer and share it with clients on the
network. This allows clients who do not have permission to establish an independent
network connection to the Fiery to print through the server.
You can specify sharing of the printer during installation of the Fiery printer files. If
you have not yet installed the Fiery printer files on the Windows NT 4.0 print server
computer, do so now, following the instructions in the
During installation, enter the information necessary to share the Fiery.
If you have already installed the Fiery printer files on the computer you are using as an
NT 4.0 print server, see your Windows documentation for information about sharing
the Fiery.
If more than one Fiery print connection is published (for example, if both the Print
queue and the Hold queue are published), you may want to create a printer for each
print connection, so you and other users can print to each connection directly. When
prompted to specify the printer name, enter a name that indicates the Fiery print
connection.
for every workstation that will print directly and
User Software Installation Guide.