Fiery EX12 Configuration Manual page 30

2
2-6 Setting up Network Servers
Configuring clients of a Windows NT 4.0 server
Each client of a Windows NT 4.0 server is already using a network protocol to
communicate with the server. Each client can print to the Fiery if it has been shared by
a Windows NT 4.0 Server, Windows NT 4.0 Workstation, or Windows 2000
Professional computer. In that case, the client does not have to use the same network
protocol to connect to the Windows NT 4.0 server as the server uses to communicate
with the Fiery.
T
O CONNECT AND PRINT TO THE
W NT 4.0
INDOWS SERVER
• For Windows 9x/Me/2000 clients: Before printing, double-click the Windows NT 4.0
server icon in the Network Neighborhood window, and then double-click the printer
name.
You are prompted to set up the printer. When you choose to set it up, the Add Printer
Wizard dialog box appears. Follow the procedures in the
Guide.
• For Windows NT 4.0 Workstation clients: Before printing, connect to the print server
computer and select the Fiery. Right-click and choose the Open command.
When prompted, click Yes to have Windows set up the printer.
After clients have selected the printer, they can choose it from the Print Setup, Page
Setup, or Print dialog box of their application. Clients can change printing options for
their own job, but printer properties appear dimmed, and unavailable for changing.
When a client chooses Print, the job is transmitted to the Windows NT 4.0 print
server, and from there to the selected print connection on the Fiery. The job is listed in
the Print Manager on the client workstation, and the administrator can track it in the
Fiery window in the Print Manager on the Windows NT 4.0 print server.
F
IERY SHARED BY A
User Software Installation