Fiery On A Netware 5.X Network With Ndps; Tips For Experts-Netware 5.X Networks - Fiery EX12 Configuration Manual

2
2-14 Setting up Network Servers

Fiery on a NetWare 5.x network with NDPS

The Fiery supports printing over a NetWare 5.x network running either the TCP/IP
protocols or the IPX protocol. For pure IP printing, the Fiery takes advantage of
features in NDPS (Novell Distributed Print Services). For IPX printing, the Fiery
supports the PServer service in Bindery emulation or through NDS (Novell Directory
Services). For more information on IPX-based printing, see
5.x network"
Setting up a NetWare environment correctly requires the presence and active
N :
OTE
cooperation of the Novell network administrator. You must have administrator
privileges on the network to create new NDS or bindery objects.
NDPS is not like earlier queue-based versions of NetWare printing. Instead, you use an
NDPS Manager and a Printer Agent, which control the tasks previously handled by a
print queue, print server, and spooler. You can also make the printer driver available for
clients to download from Windows 9x/Me/XP and Windows NT 4.0/2000
computers.
The Fiery can receive print jobs from NetWare clients over Ethernet or Token Ring
network topologies. (For information about the Token Ring option, see
During Fiery Setup, you select the frame type or types that will be used for
communication between the Fiery and network servers. Frame type refers to the
format of a communications packet; frame types are specified in a startup file when the
NetWare server (or any other workstation) loads its network drivers.
Tips for experts—NetWare 5.x networks
Setting up the Fiery in an NDPS environment is similar to setting up any other
PostScript printer on the network. Refer to the following information when setting up
the Fiery in such an environment:
• Make sure you have a valid IP address for the Fiery and for any workstations that will
print to it or run Fiery utilities.
• In Fiery Setup, enable TCP/IP and enter the IP address, subnet mask, and gateway
address for Fiery. You can enter these manually or use DHCP, RARP, or BOOTP protocols
to assign the addresses dynamically.
• Bidirectional communication features in NDPS are not supported on the Fiery.
on page 2-8.
"Fiery on a NetWare 4.x or
Appendix A.)