Fiery System Software - Fiery EX12 Configuration Manual

3

3-7 Fiery system software

5. An administrator and an operator; operator controls all jobs; no Fiery WebTool access
(Maximum control)
Only an administrator can perform Setup, calibration, and other administrator
functions, and only an operator or administrator can control jobs from the job
management tools; users can print only to the Hold queue; the administrator and the
operator have complete control of job flow; no access to Fiery WebTools.
Use these settings
in Setup
Enable Direct connection
Enable Print queue
Enable Web Services
Set an Administrator Password
(strongly recommended )
Set an Operator password
Fiery system software
The Fiery uses Windows NT Workstation system architecture to receive and process
jobs and send job data to the copier/printer. To log on to the Fiery, enter
as the user name, and enter the password.
Configuring and monitoring the Windows NT functions from the Fiery require
N :
OTE
the Fiery Advanced Controller Interface option. For more information, contact your
authorized service/support technician.
1 2
(Minimum)
√ √
√ √
√ √
√
3 4
(Maximum)
√
√ √
√
√ √
√ √
Administrator
5
√
√