Service Setup Options - Fiery EX12 Configuration Manual

4
4-26 Performing Setup from the Control Panel
Network Setup
Service Setup
LPD Setup
Network Setup
Service Setup
PServer Setup
Exit PServer Setup
NDS Setup
Bindery Setup
Polling Interval
PServer Setup

Service Setup options

PServer is a Fiery program that can service the Novell print queues assigned to the
Novell print servers you have set up for printing to the Fiery. When you choose
PServer Setup and enable PServer, you can set up NDS (Novell Directory Services),
Bindery Services, or both. NDS is used with NetWare 4.x/5.x; Bindery Services are
used with NetWare 4.x/5.x in bindery emulation mode.
LPD Setup options
Enable LPD
Yes/No [Yes]
Select Yes to allow lpd printing. For more information, see
TCP/IP networks" on page 2-18.
PServer Setup options
Enable PServer
Yes/No [No]
Select Yes if you have a Novell network connected to the Fiery.
Choose NDS Setup if your network uses NetWare 4.x/5.x in native mode.
Choose Bindery Setup if your network uses NetWare 4.x/5.x in bindery emulation
mode.
If your network uses both NDS and Bindery, set up NDS first. If you set up NDS
after Bindery, you will overwrite Bindery Setup.
If your network uses both NDS and Bindery, and uses NetWare 4.x/5.x servers in
bindery emulation, note that the Fiery cannot service NDS and bindery emulation
servers on the same NDS tree.
"Setting up the Fiery on