Stages Of Installation On The Network - Fiery EX12 Configuration Manual

1
1-2 Connecting to the Network

Stages of installation on the network

Installation can be performed by a network or printing administrator. The stages of a
successful installation are:
• Physically connecting the Fiery to a functioning network
Prepare a network node for the Fiery—obtain cable, route it to the location where the
Fiery will be installed (near the copier/printer), and attach the cable to the network
interface of the Fiery (see
If you plan to run Command WorkStation software, you will need to install the
N :
OTE
software and connect the Command WorkStation computer to the network along with
the Fiery. For more information, see the
• Configuring the network server
When network servers are required, you need to configure those servers to provide
client access to the Fiery as a color PostScript printer. For information on configuring
network servers in Windows and UNIX network environments, see
• Setting up the Fiery
Configure the Fiery for your particular printing and network environment. First read
Chapter 2, and then see subsequent chapters for details.
• Preparing client workstations for printing
Install the files needed for printing, install additional user software, and connect the
client to the Fiery over the network. These steps are described in the
Installation Guide, and some information is also provided in
• Administering the Fiery
Monitor and maintain system performance and troubleshoot problems that arise.
For details, see
page 3-10 for details).
User Software Installation
Chapter 7 of this manual and the
Guide.
Chapter
User Software
Chapter 2.
Job Management Guide.
2.