4. Highlight the tank you partially filled and press
open the Adding Fuel window.
5. Use the
UP
the tank and press
Calibrating EP-30 Trim Tabs
Trim Tabs are calibrated though the Trim Tab pages menu. If the Trim
Tab page is not displayed in the page screen rotation, refer to Section 2:
Operation section for information on how to add the Trim Tab page to
the page screen rotation.
To calibrate Trim Tabs:
1. Make sure the Trim Tabs page is on the main display
2. Press
MENU
message will appear: Bring Tabs Full Up Press Enter.
3. Adjust the position of the Trim Tabs to the Full Up Position and
press
. A second message will appear: Run Tabs Full DN (Down).
ENTER
4. Move the Trim Tabs into the full down position. The Trim Tabs are
now calibrated. Press
Trim Tabs menu (left). When calibrating Trim Tabs, the Full Up
message (center) appears first. It is followed by the Run Tabs Full
and
keys to enter the amount of fuel you added to
DOWN
. You will be taken back to the main display.
ENTER
, select
C
ALIBRATE
. You will be taken back to the main display.
EXIT
Down message (right).
and press
T
AB
61
. That will
ENTER
. The following
ENTER