Table of Contents
Advertisement
3. Press
MENU
menu will appear with three options: Top Data, Center Data and
Bottom Data.
4. Highlight the desired data location and press
types will appear.
5. Select the desired data category and press
will happen, depending on the data category you selected.
1. If you chose Water Speed or Ground Speed, you will be taken back
to the Data Location menu. Repeat Steps 4-5 for the other data
locations you want to customize.
2. If you chose Fuel Flow, Fuel Economy, Fuel Remaining, Fuel
Used, Fuel Range, Trip Fuel Used or Seasonal Fuel, you will be
taken to the Select Engine menu which will have up to three
options: Port, Center and Starboard. Select the engine you would
like to use as the source for the data category you selected and press
. You will be taken back to the Data Location menu.
ENTER
6. Repeat Steps 4 and 5 for each of the other data locations you want to
customize. When all have been customized, press
to the Fuel Manager page.
, select
C
USTOMIZE
and press
ENTER
ENTER
36
. The data location
. A list of data
ENTER
. One of two things
|
to get back
EXIT
EXIT
Hide quick links:
Advertisement
Table of Contents
