Table of Contents
Advertisement
To set a Level Warning:
1. Press
MENU
.
MENU
2. Highlight
B
appear.
3. Select the desired fluid level and press
4. Choose
L
EVEL
appear with two options: Low Level and High Level.
5. Select the desired warning option and press
Percentage window will appear. By default, it will be set to Off. (You
can turn off a level warning by setting the Set Level percentage
window to Off.)
6. Use the
UP
percentage of tank capacity. Press
Bus Devices list. Press
NOTE:
If you configure a tank for fuel, you should choose a
warning, which will warn you when the fuel level drops below a
preset percentage of the tank's capacity. A Low Level alarm will
also work best for Fresh Water and Oil configurations. When a
tank is configured for Black Water or Waste Water, the Level
Warning should be set to the High Level. If, for example, you set
the High Level warning to 75 percent, you would be alerted before
the tank's capacity had been exceeded, allowing you to empty the
tank before it fills up.
Reset Values
Accessing the Reset Values command from the Fluid Level menu,
allows you to reset the values of an individual fluid level without
affecting the settings of any other sensor.
To Reset Values:
1. Press
MENU
press
.
ENTER
2. Highlight
B
appear.
3. Select the fluid level you want to reset and press
Level menu will appear with the following options: Level Warning,
Unconfigure, Reconfigure, Calibrate, Reset Cal and Reset Values.
4. Choose
R
ESET
appear: Press Enter to Reset Device Values.
5. Press
ENTER
defaults.
, use the
UP
and press
D
US
EVICES
and press
W
RNG
and
DOWN
repeatedly to get back to the main display.
EXIT
, use the
and
UP
and press
D
US
EVICES
and press
V
ALUES
to reset the fluid level's settings back to factory
and
keys to
DOWN
ENTER
ENTER
. The Level Warning menu will
ENTER
keys to set the alarm to the desired
. You will be taken back to the
ENTER
keys to select
DOWN
ENTER
ENTER
47
S
S
YSTEM
. The Bus Devices list will
.
ENTER
S
. The Bus Devices list will
ENTER
. The following message will
and press
ETUP
. The Set Level
L
L
OW
EVEL
and
S
YSTEM
ETUP
. The Fluid
Hide quick links:
Advertisement
Table of Contents
