Table of Contents
Advertisement
NOTE:
It is a good idea to periodically check the calibration of a fuel flow.
Reset Calibration
The Reset Calibration command allows you to set fuel flow calibration
back to default settings.
To Reset Calibration for EP-10 Fuel Flow:
1. Press
MENU
press
.
ENTER
2. Highlight
B
fuel flow you want to reset and press
3. Select
R
ESET
following message will appear: Press Enter to reset the Calibration.
4. Press
ENTER
the fuel flow, follow the steps in the previous segment regarding fuel
flow calibration.
Partial Fill
You will use the Partial Fill option each time you add fuel without
filling up the tank.
To use Partial Fill:
1. Scroll through the pages until the Fuel Manager page is on the
screen, then press
2. Use the
UP
.
ENTER
3. Select
F
UEL
4. Choose
P
ARTIAL
the Select Tank menu will appear with up to three options (Port,
Center and Starboard), depending on your engine-tank configuration.
(If you have one tank, you will be taken directly to the Adding Fuel
window.)
5. Highlight the tank you partially filled and press
open the Adding Fuel window.
6. Use the
UP
the tank and press
Calibrating EP-15 Fluid Level
The default calibration for the EP-15 Fluid Level is just as accurate as
standard fluid level gauges. If, however, the tank has an irregular
shape or greater accuracy is needed, calibration is recommended.
The EP-15 Fluid Level has three calibration options: 2 point, 3 point
and 5 point.
, use the
UP
(Bus Devices) and press
D
US
EVICES
from the fuel flow menu and press
C
AL
to set calibration back to default settings. To recalibrate
.
MENU
and
DOWN
and press
S
ETUP
and press
F
ILL
and
keys to enter the amount of fuel you added to
DOWN
. You will be taken back to the main display.
ENTER
and
keys to select
DOWN
ENTER
keys to highlight
.
ENTER
. If you have more than one tank,
ENTER
54
S
YSTEM
. Highlight the
ENTER
.
S
S
YSTEM
ETUP
ENTER
and
S
ETUP
. The
ENTER
and press
. That will
Hide quick links:
Advertisement
Table of Contents
