Table of Contents
Advertisement
6. Press
|
EXIT
you selected will be displayed.
NOTE:
If a page is customized to show information from a device that is
working improperly or is not connected to the NMEA 2000 network,
the data boxes on the gauge will flash. This indicates the device is
not sending data to the network. This could occur for a variety of
reasons, depending on the device type.
Quad Analog page (left) with Single Digital page (right).
Single Digital
The single digital page can display these data types: Alternator
Voltage, Battery Voltage, Engine Temperature, Engine Water
Pressure, Engine Oil Pressure, Fuel Pressure, Engine Boost Pressure,
Transmission Oil Pressure, Atmospheric Pressure, Temperature,
Depth, Engine Load, Total Engine Hours, Fuel Flow, Fuel Economy,
Fuel Remaining, Fuel Used, Fuel Range, Trip Fuel Use, Seasonal Fuel,
Water Speed (Paddle Wheel Speed), Ground Speed (GPS) and
Tachometer.
To customize Single Digital page:
1. Make sure the Single Digital page has been added to the page screen
rotation.
2. Use the
ENTER
the main display.
3. Press
MENU
appear.
4. Highlight the data you want to display and press
taken back to the main display where the single digital page will be
displayed with the data you selected.
Dual Digital
The Dual Digital page has two digital data boxes stacked one on top of
the other. The digital data boxes can display: Alternator Voltage,
to get back to the Quad Analog page, where the data
EXIT
and
EXIT
, select
C
USTOMIZE
keys to scroll the Single Digital page onto
and press
32
. The data menu will
ENTER
ENTER
. You will be
Hide quick links:
Advertisement
Table of Contents
