Table of Contents
Advertisement
3. Press
ENTER
reset Eng/Tank Cfg.
4. Press
ENTER
then use the
UP
that matches the number of engines and tanks on your vessel.
The Boat Setup menu options are: 1 Eng/1 Tank, 1 Eng/2 Tank, 2 Eng/1
Tank, 2 Eng/2 Tanks, 3 Eng/1 Tank or 3 Eng/3 Tanks.
5. Select the desired option and press
Size menu. The Tank Size men will have up to three options (Port
Tank, Cen Tank, Stbd Tank), depending on the engine tank
configuration you selected during Boat Setup. (If you selected one tank
during Boat Setup, you will not see any of these options. You will be
taken directly to the Setting Tank Size Window.)
6. Select a tank and press
window.
7. Use the
UP
hold and press
NOTE:
If you have one tank, press
of the tank. Press
8. After all tanks have been setup, press
the main display.
Reset Values:
The Reset command allows you to reset all values back to factory
default settings.
To reset values:
1. Press
MENU
press
.
ENTER
2. Select
R
ESET
appear: Press Enter to Reset All Values.
3. Press
ENTER
display.
WARNING:
Resetting values is a hard reset. All LMF-400 settings
will be set back to factory defaults. Resetting values,
however, does not affect engine/tank configuration or
the calibration and configuration settings of devices on
the bus.
and the following message will appear: Press Enter to
, which will open the Boat Setup menu. Press
and
keys to select an engine-tank configuration
DOWN
and
keys to enter how many gallons the tank will
DOWN
. Repeat steps 6 and 7 for each remaining tank.
ENTER
repeatedly to get back to the main display.
EXIT
, use the
and
UP
and press
V
ALUES
to reset values. You will be taken back to the main
ENTER
to open the Setting Tank Size
ENTER
after you have input the capacity
ENTER
EXIT
keys to select
DOWN
. The following message will
ENTER
22
, which will open the Tank
repeatedly to return to
S
YSTEM
,
ENTER
and
S
ETUP
Hide quick links:
Advertisement
Table of Contents
