Table of Contents
Advertisement
2. Highlight
B
appear.
3. Select
P
ORT
. The following message will appear: Press Enter to UnConfig
ENTER
Device Name.
4. Press
ENTER
the interface will now be displayed as UnCfg Intrfc.
5. Select Starboard Engine and press
6. Highlight
C
will appear with up to three options (Port, Center and Starboard),
depending on your engine-tank configuration.
7. Select
P
ORT
Devices list.
8. Highlight UnCfg Intrfc and press
appear: Press Enter to Configure Eng Intrfc.
9. Press
ENTER
the model of Suzuki engine on your vessel and press
Engine menu will appear with up to three options (Port Center and
Starboard).
10. Choose Starboard and press
Bus Devices list where the engine interfaces will be shown with their
new configuration names.
If desired configuration name available:
1. Press
MENU
press
.
ENTER
2. Highlight
B
appear.
3. Select the engine interface you want to reconfigure and press
Highlight
C
HANGE
appear with up to three options (Port, Center or Starboard), depending
on your engine-tank configuration.
4. Choose the desired configuration name and press
taken back to the Bus Devices list, where the engine interface you
reconfigured will be displayed with its new configuration name.
Fuel Warning (Fuel Wrng)
Fuel Warning allows you to set a Low level or High level alarm for each
Suzuki Engine Interface on the network. A pop-up window will appear
if the fuel rises above or falls below a threshold of your choosing.
1. Press
MENU
press
.
ENTER
and press
D
US
EVICES
and press
E
NGINE
. You will be taken back to the Bus Devices list, where
E
HANGE
NGINE
and press
ENTER
, which will open the Suzuki Engine Model menu. Select
, use the
UP
and press
D
US
EVICES
and press
E
NGINE
, use the
UP
ENTER
. Highlight
ENTER
ENTER
and press
ENTER
. You will be taken back to the Bus
ENTER
. You will be taken back to the
ENTER
and
keys to select
DOWN
ENTER
ENTER
and
keys to select
DOWN
50
. The Bus Devices list will
U
NSET
.
. The Select Engine menu
. The following message will
ENTER
S
. The Bus Devices list will
. The Select Engine menu will
ENTER
S
and press
E
NGINE
. The Select
and
S
YSTEM
ETUP
ENTER
. You will be
and
S
YSTEM
ETUP
.
Hide quick links:
Advertisement
Table of Contents
