Calibrating Ep-30 Trim Tabs - Lowrance LMF-200 Installation And Operation Instructions Manual

3. Use the and keys to input the amount of fuel you added to
UP DOWN
the tank and press . You will be directed to the main display.
MENU

Calibrating EP-30 Trim Tabs

Trim Tabs are calibrated though the Trim Tab menu. If the Trim Tab
page has not been added to the page screen rotation, see the Add Page
segment in Section 3: Operation.
1. Make sure the Trim Tab page is on the main display, then press
to access the Trim Tab page menu.
MENU
2. Press , select and press .
MENU C T MENU
AL AB
The following message will appear: Set Tabs Full Up hit Menu.
3. Adjust the Trim Tabs to the Full Up Position and press . A
MENU
second message will appear: Run Tabs Full DN (Down).
4. Adjust the Trim Tabs into the full down position. The Trim Tabs are
now calibrated. You will be taken back to the main display.
57