Table of Contents
Advertisement
7. Press
MENU
press
.
ENTER
8. Highlight
F
9. Select
R
EFILL
with up to three options (Port, Center and Starboard), depending on
your engine-tank configuration. Select the tank you refilled and press
.
ENTER
10. The Recalibration menu will appear with two options: Yes and No.
Select
and press
Y
ES
11. The Filled Quantity window will appear. Use the
keys to input the amount of fuel you added and press
be taken back to the main display.
12. Repeat these steps for each engine interface you want to calibrate.
NOTE:
The LMF-400 will not let you input an amount of fuel greater than
the fuel used figure.
Reset Fuel Calibration
The Reset Calibration command allows you to reset engine interface
calibration back to default settings.
To reset Calibration for Suzuki Engine Interface:
1. Press
MENU
press
.
ENTER
2. Highlight
interface you want to reset and press
3. Select
R
F
ST
The following message will appear: Press Enter to reset the Fuel Cal.
4. Press
ENTER
the engine interface, follow the steps in the previous segment regarding
engine interface calibration.
Partial Fill
You will use the Partial Fill option each time you add fuel but do not
fill up the tank.
To use Partial Fill:
1. Use the
UP
.
ENTER
2. Select
F
UEL
3. Choose
P
ARTIAL
the Select Tank menu will appear. (If you have one tank, you will be
taken directly to the Adding Fuel window.)
, use the
UP
and press
S
UEL
ETUP
and press
T
ANK
ENTER
, use the
UP
B
D
US
EVICES
from the engine interface menu and press
C
UEL
AL
to set calibration back to default settings. To recalibrate
and
DOWN
and press
S
ETUP
and press
F
ILL
and
keys to select
DOWN
.
ENTER
. The Select Tank menu will open
ENTER
.
and
keys to select
DOWN
and press
ENTER
ENTER
keys to highlight
.
ENTER
. If you have more than one tank,
ENTER
60
S
YSTEM
UP
ENTER
S
YSTEM
. Highlight the engine
.
S
S
YSTEM
ETUP
and
S
ETUP
and
DOWN
. You will
and
S
ETUP
.
ENTER
and press
Hide quick links:
Advertisement
Table of Contents
