Level Warning - Lowrance LMF-400 Installation And Operation Instructions Manual

5. Use the
UP
to the tank and press
appear on the screen.
6. Use the
UP
. You will be taken back to the Bus Devices list, where the tank
ENTER
will be displayed as BlkWtr Tnk (1, 2 or 3).
To unconfigure Fluid Level:
1. Press
MENU
press .
ENTER
2. Highlight
Devices list.
3. Choose a configured Fluid Level from the Bus Devices list and press
. The Fluid Level will appear with the following options: Level
ENTER
Warning, Unconfigure, Reconfigure, Calibrate, Reset Cal and Reset
Values.
3. Highlight
following message: Press Enter to Unconfig Device name.
4. Press
ENTER
where the fluid level you unconfigured will be displayed as UnCfg F
Level.
To reconfigure Fluid Level:
1. Press
MENU
press .
ENTER
2. Highlight
B
appear.
3. Select the Fluid Level you want to configure and press
4. The Fluid Level menu will appear with the following options: Level
Warning, Unconfigure, Reconfigure, Calibrate, Reset Cal and Reset
Values.
5. Choose
R
ECONFIGURE
input the tank number you want to assign the fluid level and press
. The Setting Tank Size window will appear on the screen.
ENTER
6. Use the
UP
. You will be taken back to the Bus Devices list, where the fluid
ENTER
level will be displayed with its new configuration.

Level Warning

A Level Warning alerts you when the fluid level rises above or falls
below a preset percentage of tank capacity. The Level Warning menu
has two options: Low Level and High Level. A low level warning is used
for fluid types like fuel, oil and freshwater, whereas a high level
warning is best suited for black water and Waste Water (Gray Water).
and keys to input the number you want to assign
DOWN
ENTER
and keys to input the size of the tank and press
DOWN
, use the
UP
and press
B D
US EVICES
U
NCONFIGURE
and you will be taken back to the Bus Devices list
, use the
UP
and press
D
US EVICES
and press
and keys to input the size of the tank and press
DOWN
. The Setting Tank Size window will
and keys to select
DOWN
ENTER
and press
ENTER
and keys to select
DOWN
ENTER
. Use the
ENTER
46
S
YSTEM
, which will open the Bus
, which will launch the
S
YSTEM
. The Bus Devices list will
and
UP
and
S
ETUP
and
S
ETUP
.
ENTER
keys to
DOWN