Table of Contents
Advertisement
1. Press
MENU
press
.
ENTER
2. Highlight
B
appear.
3. Select
U
C
N
appear: Press Enter to Configure Fuel Flow Snsr.
4. Press
ENTER
options: Port, Center and Starboard.
NOTE:
If your unit is set to a one-engine configuration, the Configuration
Options menu will not appear when you are configuring a fuel flow.
On the Bus Devices list, the fuel flow will automatically be given
the configuration name Eng FFlow.
5. Select the desired engine and press
the Bus Devices list where the fuel flow will now be listed as Port
FFlow, Cen FFlow or Stbd FFlow, depending on the engine you chose
from the Select Engine menu. Press
main display.
To unconfigure an EP-10 Fuel Flow:
The unconfigure command allows you to set an EP-10 fuel flow back to
its original unconfigured status.
Unset Engine
1. Press
MENU
press
.
ENTER
2. Highlight
B
3. Select the desired fuel flow and press
will appear. Select
message will appear: Press Enter to UnConfig Device Name.
4. Press
ENTER
where the fuel flow you unconfigured will be shown as UnCfg F Flow.
To reconfigure an EP-10 Fuel Flow:
You will use the Change Engine command to reconfigure a Fuel Flow.
Change Engine, however, will only appear on your LMF-400 menu if
you have more than one engine. If all the fuel flows on your vessel are
configured, you will have to unconfigure a fuel flow to free up its
configuration name (Port, Center, Starboard).
If all three fuel flows are configured, which means there is no name
configuration available, follow the first set of instructions. If the desired
configuration name is available, follow the second set of instructions.
, use the
UP
and press
D
US
EVICES
and press
F F
FG
LOW
to open the Select Engine menu with up to three engine
, use the
UP
and press
D
US
EVICES
U
NSET
and you will be directed back to the Bus Devices list,
and
keys to select
DOWN
ENTER
ENTER
ENTER
EXIT
and
keys to select
DOWN
to open the Bus Devices list.
ENTER
and press
E
NGINE
40
S
. The Bus Devices list will
. The following message will
. You will be taken back to
repeatedly to get back to the
S
. The Fuel Flow menu
ENTER
. The following
ENTER
and
S
YSTEM
ETUP
and
S
YSTEM
ETUP
Hide quick links:
Advertisement
Table of Contents
