Table of Contents
Advertisement
Section 4: EP Configuration &
To configure items connected to the LowranceNET, press
and press
S
S
YSTEM
ETUP
open the Bus Devices list. Bus Devices works as the device manager for
the bus, allowing you to configure and unconfigure devices and set and
reset critical values such as alarms and calibration.
NOTE:
The Suzuki Engine Interface, EP-35 Temperature sensor, EP-15
Fluid Level, EP-50 Storage Device and EP-10 Fuel Flow are the
only sensors that can be configured through the Bus Devices list.
Bus Devices highlighted in the System Setup menu (left). Searching
Bus Devices window (center) with Bus Devices list (right).
EP-35 Temperature Configuration
The EP-35 Temperature sensor has three configuration options: Inside,
Outisde and Water. An unconfigured temperature sensor will appear
on the bus devices list as UnCfg Temp.
To configure EP-35 Temp Sensor:
1. Press
MENU
press
.
ENTER
2. Highlight
B
appear.
3. Select an unconfigured temp sensor (
The following message will appear: Press Enter to Configure Temp
Sensor.
4. Press
ENTER
Water Temp, Outside Temp and Inside Temp.
5. Highlight the desired option and press
configured. You will be directed to the Bus Devices list. Press
repeatedly to get back to the main display.
Calibration
ENTER
, use the
and
UP
and press
D
US
EVICES
, which will open the Sel Temp menu with three options:
. Highlight
B
US
keys to select
DOWN
ENTER
U
N
37
and press
D
EVICES
S
YSTEM
. The Bus Devices list will
) and press
C
T
FG
EMP
. The temp is now
ENTER
, select
MENU
to
ENTER
and
S
ETUP
.
ENTER
EXIT
Hide quick links:
Advertisement
Table of Contents
