Table of Contents
Advertisement
4. Select
S
ET
(Choose
to turn off the Shallow Alarm).
O
FF
5. Use the
UP
press
. Press
ENTER
To set the Deep Alarm:
The deep alarm will sound when your vessel enters water deeper than
the selected deep alarm threshold.
1. Press
MENU
press
.
ENTER
2. Highlight Sonar Alarms and press
menu with two options: Shallow and Deep.
3. Select
D
EEP
two options: Off and Set Depth.
4. Select
S
D
ET
Alarm).
5. Use the
UP
then press
EXIT
Sonar Alarms highlighted on System Setup menu (left). Sonar Alarms
menu (center); Reset Values selected on System Setup menu (right).
Engine/Tank Configuration
The Engine/Tank configuration menu displays the number of engines
and fuel tanks on the vessel as well as fuel tank capacity. You selected
your engine-tank configuration during Boat Setup. If the selected
configuration is incorrect, you can return to Boat Setup by resetting the
configuration from the Engine/Tank Configuration menu.
To reset Eng/Tank configuration:
1. Press
MENU
press
.
ENTER
2. Select
E
/T
NG
screen appears with the following message at the bottom of the page:
Press Enter to reset Cfg (configuration).
and press
D
EPTH
and
keys to set the alarm to the desired depth and
DOWN
to return to the Sonar Alarms menu.
EXIT
, use the
UP
and press
ENTER
and press
EPTH
and
keys to set the alarm to the desired depth,
DOWN
repeatedly to get back to the main display.
, use the
and
UP
and press
C
ANK
FG
to open the Set Depth menu.
ENTER
and
keys to select
DOWN
ENTER
. The Shallow menu will appear with
. (Choose
ENTER
keys to highlight
DOWN
. The Engine Tank information
ENTER
21
S
YSTEM
to open the Sonar Alarms
to turn off the Deep
O
FF
S
YSTEM
and
S
ETUP
and
S
ETUP
Hide quick links:
Advertisement
Table of Contents
