Table of Contents
Advertisement
Timeout
You will notice there is no exit key in the LMF-200. Its menus time out,
meaning they will be automatically cleared from the screen after a
preset amount of time. The timeout duration will begin after the last
button is pushed.
1. To change the Timeout settings, press
keys to select
2. Highlight
T
four options: 3, 5, 10 and 15 seconds.
3. Choose the desired timeout setting and press
taken back to the main display.
Eng (Engine)/Tank
The Engine/Tank configuration menu displays the number of engines
and fuel tanks on the vessel as well as fuel tank capacity. You selected
your engine-tank configuration during Boat Setup. If the selected
configuration is incorrect, you can return to Boat Setup by resetting the
configuration from the Engine/Tank Configuration menu.
To reset Eng/Tank configuration:
1. Press
MENU
press
.
MENU
2. Highlight
E
page will appear.
3. Press
MENU
reset Eng/Tank. Press
screen.
Reset
The Reset command allows you to switch the LMF-200 back to factory
default settings.
To reset values:
1. Press
MENU
press
.
MENU
2. Highlight
R
Hit Menu to Rst All values. Press
main display.
WARNING:
Resetting values is a hard reset. All LMF-200 settings
will be set back to factory defaults. Resetting values,
however, does not affect engine/tank configuration or
the calibration and configuration settings of devices on
the bus.
and press
S
S
YSTEM
ETUP
and press
IMEOUT
, use the
UP
and press
/T
NG
ANK
and the following message will appear: Press Menu to
MENU
, use the
UP
and press
ESET
MENU
. The Timeout menu will open with
MENU
an
keys to select
DOWN
. The Engine-Tank configuration
MENU
. You will be taken to the Boat Setup
and
keys to select
DOWN
. The following message will appear:
MENU
. You will be taken back to the
MENU
22
, use the
MENU
.
MENU
S
YSTEM
S
YSTEM
and
UP
DOWN
. You will be
and
S
ETUP
and
S
ETUP
Hide quick links:
Advertisement
Table of Contents
