Automatic Needle Threader - JUKI HZL-F series Instruction Manual

Automatic needle threader

Thread cutter * Be careful that the cutter is inside.
21
22
A
Threading lever
1
Lower the presser foot.
* The automatic needle threader sometimes
fails to thread the needle when the presser
foot is raised.
2
Thread to A and cut the thread with the
thread cutter.
3
Lower the threading lever until it comes
to a complete stop.
* Lower the threading lever slowly.
4
Release the threading lever and the
needle thread is threaded to the needle
eye.
5
Pull the thread backward.
Pull out the thread from the needle eye by approx.
10 cm or 4 inches long.