Automatic Needle Threader - JUKI HZL-F Series Instruction Manual

Automatic needle threader

* Be careful that the cutter is inside.
1
Thread cutter
2
Threading lever
3
4
26
A
Lower the presser foot.
* The automatic needle threader sometimes fails to thread the
needle when the presser foot is raised.
Thread to A and cut the thread with the thread
cutter.
Lower the threading lever until it comes to a complete stop.
* Lower the threading lever slowly.
Release the threading lever and the needle thread is
threaded to the needle eye.
.
Pull the thread backward.
Pull out the thread from the needle eye by approx. 10 cm or 4 inches
long.