■ Automatic needle threader
* Be careful that the
8
cutter is inside.
7
34
9
* When twin needle is used, the automatic needle
threader can not be used.
* Use the needle: No.11-16 and the thread: No.30-90.
1
Lower the presser foot with the presser
foot lifting lever.
* The automatic needle threader sometimes fails
to thread the needle when the presser foot is
raised.
2
7
Thread to
and cut the thread with the
8
thread cutter
3
Lower the threading lever
to a complete stop.
* Lower the threading lever slowly.
4
Release the threading lever and the
needle thread is threaded to the needle
eye.
5
Lift the presser foot. Then, draw the
needle thread backward.
Pull out the thread from the needle eye by
approx.10 cm or 4 inches long.
.
9
until it comes