Applique (2) - JUKI HZL-F series Instruction Manual

Applique (2)

Pattern paper
65 66
Direct 6
Pattern
Quilting 01~04, 35~37
No.
Quilting 01~04, 07, 08
Manual buttonhole presser foot (I)
Presser
foot
Open toe presser foot (O)
To make the stitch unconspicuous, an applique can be sewn.
1
Seam allowance
2
3
4
Basting
5
* Usually center needle position is used for appliqué
stitches but right or left needle position can be used.
Changing needle position: Refer to page 81
F600
F400/F300
F600 Only
Cut the applique fabric with seam
allowance of 3~5mm.
Put the pattern paper onto the wrong side
of the fabric and fold the seam allowance
at the finish line.
Put the applique fabric on the base fabric.
Temporarily fix it with basting stitches or
glue.
Turn the hand wheel towards you and
start sewing along with the outer side of
the applique fabric.
When you start sewing, the machine will automatically
sew 3 lock stitches.
* When sewing steep angles, keep the needle inside
the fabric, raise the presser foot, change sewing
direction and sew slowly.
Lock stitch at the end of sewing.
Push the reverse stitch button and the machine will
automatically sew 3 lock stitches.
It is better to lock stitch at the outer side of the applique
fabric.
Attention
Turn OFF the power
switch before replacing
the presser foot.