Centered insertion
Seam line
Basting
Teeth
Fabric
(wrong side)
Fabric
(right side)
0.7 to 1 cm
Reverse
stitches
0.7 to 1 cm
Slider
Zipper
(back)
Fabric
(wrong side)
Set on right
Zipper tape
Set on left
1
Baste zipper and garment body.
Open the seam allowance. Fit the teeth of the zipper at
the end of the seam line and perform basting by hand.
Pull the slider tab to the up side.
2
Sew the left part of the zipper on the seam
allowance from the bottom of the opening
to the top.
Sew 0.7 to 1 cm from the seam line.
3
Sew the right part of the zipper.
Sew reverse stitches a few times.
Sew the other side 0.7 to 1 cm from the seam line.
4
Undo only the basting stitches.
56
57