JUKI HZL-F series Instruction Manual page 46

When changing the needle entry point
1. If the stitches reach too far beyond the folded edge
2. If the stitches fail to reach the folded edge
43 44
F600 Only
Turn the zigzag width adjusting
dial to the left side.
F400 / F300
Push the zigzag width
adjusting button "-".
F600 Only
Turn the zigzag width adjusting
dial to the right side.
F400 / F300
Push the zigzag width
adjusting button "+".
Turn the handwheel
to check the needle
entry point. When
adjusting, make sure
the needle is in the
up position.
Turn the handwheel
to check the needle
entry point. When
adjusting, make sure
the needle is in the
up position.