Automatic Needle Threader - JUKI TL-2020 PE Instruction Manual

Threading the machine

■ Automatic needle threader

1
Lower the presser foot and lower needle
threader lever.
Bring the needle to the top position and lower the thread-
ing lever.
2
Pass the needle thread through the hook.
Pass the needle thread from the opposite side to this
side, and move the thread on the right-hand side until it
comes in contact with the guide.
3
Take your finger off the needle threader
lever.
When the finger is taken off, thread is caught in the hook
and passed through the needle's eye.
4
Draw out the needle thread.
Draw out the passed thread about 10 cm from the nee-
dle's eye.
19