Bartacking - JUKI HZL-F series Instruction Manual

Bartacking

Bartacking is used to reinforce the part of the seam that is likely to ravel.
* The length of the bartack is determined by pushing the reverse stitch button, but it will automatically make
a u-turn when it reaches the maximum of 20 stitches.
* If the presser foot cannot be parallel to throat plate, use filler fabric or cardboard.
example of use
10 cm
Fabric
Practical 19
Pattern No.
Practical 17
Manual buttonhole
Presser foot
presser foot (I)
Trousers
and skirt
1
2
Turn OFF the power switch
F600
before replacing the presser
F400 / F300
foot.
Bag
Pass the needle thread through the
presser foot.
Place the fabric under the presser foot.
Attention
Pocket
52
53