Pulling Up The Bobbin Thread - JUKI HZL-F series Instruction Manual

Pulling up the bobbin thread

Basic operation:
You can start to sew without pulling up the bobbin
thread, however, if you want to sew with the
bobbin thread pulled out, follow the directions
below.
1
Lift the presser foot and lightly hold the
end of the needle thread.
2
Turn the hand wheel towards you to move
the needle up and down. Loop of bobbin
thread will be pulled out when you will
pull the needle thread lightly.
3
Pull out both needle and bobbin threads
by approx. 10 cm (4 inches) long and
pass them under the presser foot towards
the back of the machine.
22
23