Twin Needle Sewing - JUKI HZL-F series Instruction Manual

Twin needle sewing

By using two needles beautiful decorative stitches
can be sewn.
* When using twin needles, make sure to set twin needle
sewing in Option
* When twin needle sewing, make sure to use thread size
smaller than No. 60.
* Make sure to use a twin needle with size of 2.0 mm (included
needle: 2.0 mm).
* When twin needle sewing, the sewing speed will become
slower.
84
and perform test sewing.
Turn OFF the power switch before
Attention
replacing the presser foot.
Direct 1, 4
One-point 17, 19, 20, 21,
F600
Pattern
24~31, 34~38
No. One-point 17, 19, 20, 21,
F400
24~29, 31~33
One-point 9, 10, 13~17
F300
Presser
Standard presser foot (A)
foot
Manual buttonhole presser foot (I)
2.0 mm
How to thread the needles
1
Place the supplementary spool pin.
2
Thread to the thread guide
thread paths are same up from
3
Do not thread for right-hand needle.
4
Thread to right-hand and left-hand needles
separately.
* Automatic needle threader can not be
used. Thread each needle manually.
* Automatic thread trimmer can not be
used in case of twin needle sewing.
1
first. After that,
to .