Patchwork Piecing (Joining) - JUKI HZL-F series Instruction Manual

Patchwork piecing
63 64
Pattern No. Direct 2
Standard presser
Presser foot
foot (A)
To sew pieces of cloth together is called piecing in patchwork.
When piecing, the seam allowance is usually 1/4" (6.4 mm).
1
1/4" (6.4 mm)
2
0.0
* You can change the needle position as you like.
Needle position change: Refer to page 81
Turn OFF the power switch
before replacing the presser
foot.
Cut the fabric with seam allowance.
Align the right end of the presser foot and
the edge of the fabric and sew.
The needle will enter 1/4" (6.4 mm) from the edge of
the fabric, so the seam allowance of 1/4" (6.4 mm) can
be sewn.
7.0
The needle position can be
adjusted between 0.0~7.0.
When the needle position is at '5.6',
the needle is 1/4" (6.4 mm) from
1/4" (6.4 mm)
the right edge of standard presser
foot (A).
5.6
Attention