Message Catalog - JUKI HZL-F series Instruction Manual

Message catalog

Message
1
2
3
4
5
6
7
8
9
10
Cause (Reason to display such messages)
A. When "start/stop", "reverse stitch" or "thread-trimming" button
is pressed while the presser foot is raised.
B. When presser foot is raised while sewing.
A. When one of the buttonhole stitches is selected and the
buttonhole sensor pin is not connected, the machine starts to
sew.
A. When a stitch pattern other than buttonholes is selected but
the buttonhole sensor pin is connected, the machine starts to
sew.
A. When in the mode, user attempts to select stitch
patterns more than the maximum number of memory (70).
A. When in the mode and more than one stitch pattern is
selected, user attempts to move to mode
.
B. When in the mode and more than one stitch pattern is
selected, user presses the
seconds (deleting all).
C. When in the mode and more than one stitch pattern is
selected, user presses the
A. When the process of saving a pattern into folder is completed.
A. When in the option setting, settings which will be kept after
turning off the machines are changed. (Thread trimming by
foot controller, LCD contrast, buzzer volume and language
setting)
A. When the setting of the machine is changed to twin needle
sewing (option setting).
A. When in twin needle sewing, a stitch pattern other than twin
needle sewing is selected.
A. When the motor is locked, the machine stops temporarily for
safety.
and/or
button for more than two
button (calling a memory).
91 90