Straight stitch
33
34
Pattern No.
Direct 1
Standard presser
Presser foot
foot (A)
Thread tension Auto
Thread trimming
foot switch
Turn OFF the power switch
before replacing the presser
foot.
Sewing start
Pull the needle and bobbin threads under the presser
foot to the rear of the machine and lower the presser foot
to start sewing.
This means presser foot is up.
Lower the presser foot to start
sewing.
Sewing end
Stop sewing and push the thread trimming button to trim
the threads.
<by thread trimming button>
Push the thread trimming button to trim the threads.
<by foot controller>
Push heel side of the foot controller to trim the threads.
* This function can be cancelled.
(Refer to page 82.)
* You can also cut the threads by the thread cutter at
the face plate cover.
Attention