Bobbin Thread Preparation - JUKI HZL-F series Instruction Manual

Bobbin thread preparation

Taking out the bobbin
Hook cover
Setting thread spool
Spool Cap Small spool
Spool Cap Small spool
Spool Cap Large spool
Spool Cap
Large spool
15
16
Attention
1
Open the hook cover.
2
Take out the bobbin.
* If the bobbin has too little thread, do not use it as
the thread will get tangled.
* Use only the designated bobbin. Other bobbins may
cause malfunction.
1
Place a thread spool to spool pin and a
spool cap onto the spool pin.
* Do not use the thread cone with a small amount
of thread. This may cause thread tangling
and/or the thread coming out of the eye of the
needle when starting to sew.
There are three types of the spool caps, large, medium
and small. Choose the size of spool cap according to
the thread spool to be used.
Turn OFF the power switch
before the bobbin is taking
out and/or put into the
bobbin case.