Creating A New Continuous Sewing Pattern; Setting The Starting Step Of The Continuous Sewing Pattern - JUKI LZ-2290C-F Instruction Manual

8-3-3. Creating a new continuous sewing pattern

① Selecting the new-pattern creating function
Display the "new sewing pattern creation screen" referring to ① in
② Creating a continuous sewing pattern
<New pattern creation screen>
③ Setting the pattern function on a step-by-step basis
A
<New sewing pattern edit screen>

8-3-4. Setting the starting step of the continuous sewing pattern

In the case it is necessary to re-sew a pattern from the middle of the pattern after the occurrence of troubles
such as thread breakage, it is possible to re-start sewing from an arbitrary step of the pattern.
<Sewing screen (continuous sewing pattern)>
❶
❷
❹ ❺ ❻
❸
❶
"8-1-1. Creation of a new pattern" p.
Referring to ② in
tern" p. 137 , select continuous sewing pattern
❶ on the sewing pattern selection screen.
Then, press
The "new sewing pattern edit screen" is dis-
played.
1) Set the pattern function with buttons ❸ on a
step-by-step basis.
Refer to "5-2. Sewing patterns" p.
2) The total number of steps you have set is dis-
played on the right of section A. The current
step is displayed on the left of section A. The
current step can be changed with
3) Press
The "sewing pattern number registration
screen" is displayed.
Press
confirmation screen.
Steps of procedure to be taken after the afore-
mentioned step are same as steps ③ to ④ in
1-1. Creation of a new pattern" p.
❶ is pressed on the sewing screen
When
for the continuous sewing pattern, the current
step can be changed.
– 152 –
"8-1-1. Creation of a new pat-
❷ .
❺ .
❻ to display the data discard
137.
137.
45.
❹ .
"8-