Basic Operation - Icom IC-2300H Instruction Manual

Previous view
3

BASIC OPERATION

D DTMF tones
z When "d" is displayed in the 100 MHz digit, fi rst can-
cel the DTMF memory encoder. (p. 37)
x Push [DTMF-S]
, and then push the keys of the
desired DTMF digits.
• The function indicator lights green.
• 0–9, A–D, M(E) and #(F) are selectable.
• Push [DTMF-S]
keypad mode.
• The transceiver has ten DTMF memory channels
for autopatch operation. See page 36 for details.
D 1750 Hz tone
The microphone has 1750 Hz tone capability, used as a
ring tone when calling, and so on.
z Push [FUNC]
.
• The function indicator lights orange.
x Push [TONE-1]
to transmit a 1750 Hz tone call
signal for 1 second (approximately); hold down
[TONE-2] to continuously transmit a 1750 Hz
tone call signal.
• The function indicator automatically goes out.
Using the HM-133V
again to return to the normal
Using the HM-133V
Push ,
then push the desired keys.
Push ,
then or
14
.