Memory Clearing - Icom IC-2300H Instruction Manual

Previous view
5
MEMORY OPERATION

■ Memory clearing

Contents of programmed memories can be cleared
(blanked).
q Push [V/MH z] to select the VFO mode.
w Push [S.MW].
• The " " icon and the memory channel number
blink.
e Rotate [DIAL] to select the memory channel to be
cleared.
• Memory channels not yet programmed are blank.
r Push [S.MW], and then sequentially hold down
[MW] (S.MW) again for 1 second
☞ This operation must be performed within
1.5 seconds.
• 3 beeps sound, and then the memory channel is
cleared.
• The " " icon and memory channel number blink.
• When clearing the Call channel, the current VFO
contents are automatically re-programmed into the
Call channel.
t Push any key other than [S.MW], to return to the
VFO mode.
NOTE: Be careful!— the contents of cleared memo-
ries CANNOT be recalled.
Using the HM-133V
z Push [VFO]
to select the VFO mode.
x Push [FUNC]
, and then push [MW]
c Push [Y] or [Z] to select the memory channel to be
cleared.
• The " " icon and channel number blink.
• Memory channels not yet programmed are blank.
v Push [FUNC]
then [MW]
[FUNC] then hold down [MW]
☞ This operation must be performed within
1.5 seconds.
• 3 beeps sound, and then the memory channel is
cleared.
• The " " icon and memory channel number blink.
• When clearing the Call channel, the current VFO
conditions are automatically re-programmed into
the Call channel.
b Push [CLR]
, to return to the VFO mode.
[i.e.]: Clearing memory channel 20.
Push [V/MHz] to select the VFO mode.
MUTE
NAR
MID
LOW
LOCK
S ET
Push [S.MW].
MUTE
NAR
MID
LOW
LOCK
S ET
Rotate [DIAL] to select the memory channel.
MUTE
NAR
MID
LOW
LOCK
S ET
Push [S.MW], and within 1.5 seconds,
hold down [MW] (S.MW) for 1 second again.
MUTE
NAR
MID
LOW
LOCK
S ET
Push any key other than [S.MW].
MUTE
NAR
MID
LOW
LOCK
S ET
[i.e.]: Clearing memory channel 20.
Push
.
MUTE
NAR
MID
LOW
LOCK
S ET
Push
, and then push
for 1 second.
MUTE
NAR
MID
LOW
LOCK
S ET
Rotate
MUTE
NAR
MID
LOW
LOCK
S ET
Push
push
MUTE
NAR
MID
LOW
LOCK
S ET
Push
MUTE
NAR
MID
LOW
LOCK
S ET
22
DIGITAL PRIO AO BUSY
ANM DUP T-SCAN PRIO SCAN
MONI LOW TONE M/CALL V/MHz
DIGITAL PRIO AO BUSY
ANM DUP T-SCAN PRIO SCAN
MONI LOW TONE M/CALL V/MHz
DIGITAL PRIO AO BUSY
ANM DUP T-SCAN PRIO SCAN
MONI LOW TONE M/CALL V/MHz
DIGITAL PRIO AO BUSY
ANM DUP T-SCAN PRIO SCAN
MONI LOW TONE M/CALL V/MHz
DIGITAL PRIO AO BUSY
ANM DUP T-SCAN PRIO SCAN
MONI LOW TONE M/CALL V/MHz
to select the VFO mode.
DIGITAL PRIO AO BUSY
ANM DUP T-SCAN PRIO SCAN
MONI LOW TONE M/CALL V/MHz
then .
DIGITAL PRIO AO BUSY
ANM DUP T-SCAN PRIO SCAN
MONI LOW TONE M/CALL V/MHz
/
to select the memory channel.
DIGITAL PRIO AO BUSY
ANM DUP T-SCAN PRIO SCAN
MONI LOW TONE M/CALL V/MHz
then , and within 1.5 seconds,
then hold down for 1 second again.
DIGITAL PRIO AO BUSY
ANM DUP T-SCAN PRIO SCAN
MONI LOW TONE M/CALL V/MHz
.
DIGITAL PRIO AO BUSY
ANM DUP T-SCAN PRIO SCAN
MONI LOW TONE M/CALL V/MHz