Memory Bank Setting - Icom IC-2300H Instruction Manual

Previous view
5
MEMORY OPERATION

■ Memory bank setting

q Push [M/CALL] to select the memory mode, and
then rotate [DIAL] to select the desired memory
channel.
w Push [SET] to enter the Set mode.
e Push [SET] or [MONI] until "BAK" appears.
• "– –" indication blinks.
r Rotate [DIAL] to select the desired bank to be set.
t Push any key other than [SET] or [MONI] to assign
the channel into the selected bank and exit the Set
mode.
Using the HM-133V
z Push [MR]
, and then select the desired memory
channel using [Y], [Z] or keypad.
x Push [SET]
to enter the Set mode.
c Push [SET]
or [ENT]
• "– –" indication blinks.
v Push [Y] or [Z] to select the desired bank to be
set.
b Push [CLR]
to assign the channel into the se-
lected bank and exit the Set mode.
until "BAK" appears.
23
[i.e.]: Setting memory channel 1 to bank "A."
Push [SET].
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN PRIO SCAN
S ET MONI LOW TONE M/CALL V/MHz
Push [SET] or [MONI] to select the "BAK" item.
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK PRIO SCAN
ANM DUP T-SCAN
S ET MONI LOW TONE M/CALL V/MHz
Rotate [DIAL] to select the desired bank.
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN PRIO SCAN
S ET MONI LOW TONE M/CALL V/MHz
[i.e.]: Setting memory channel 1 to bank "A."
Push .
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN PRIO SCAN
S ET MONI LOW TONE M/CALL V/MHz
Push or to select the "BAK" item.
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN PRIO SCAN
S ET MONI LOW TONE M/CALL V/MHz
/
Rotate to select the desired bank.
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN PRIO SCAN
S ET MONI LOW TONE M/CALL V/MHz