27: Zfil-Val-Checkpointx - HP Guardian Errors Manual

ZSPI-TKN-PROC-ERR is the procedure in which the error occurred. Its value is
ZFIL-VAL-CHECKPOINTMANYX (26). ZFIL-TKN-CHECKPOINTSTATUS indicates the status of the
call to CHECKPOINTMANYX. This token returns a status word in the following form:
Value Meaning
<0:7>=0 No error
<0:7>=1 There is no backup or the primary process cannot communicate with the backup; then
<8:15>=
<0:7>=2 Takeover from the primary; then
<8:15>=0
<8:15>=1
<8:15>=2
<8:15>=3
<0:7>=3 Invalid parameter; then
<8:15>=1
<8:15>=n, n > 1
Conditional Tokens
ZFIL-TKN-STACKBASE is the checkpoint base-of-stack.
ZFIL-TKN-SREGISTER is the current S register.
ZFIL-MAP-CHECKPOINTLIST is the CHECKPOINTX list passed to CHECKPOINTMANYX.
ZFIL-TKN-OLDPRIMARY is the old primary process ID.
Effect
If an error occurs, the operation fails. If the backup process takes over, the system continues
normally.
Recovery
Check ZFIL-TKN-CHECKPOINTSTATUS for information about CHECKPOINTMANYX.
If the backup process took over, this message is informative only; no corrective action is necessary.

27: ZFIL-VAL-CHECKPOINTX

A call to the procedure CHECKPOINTX returned a nonzero file-system error. Either an error was
detected or a backup takeover occurred.
Unconditional Tokens
ZSPI-TKN-ERRLIST
ZSPI-TKN-ERROR
ZSPI-TKN-PROC-ERR
ZFIL-TKN-CHECKPOINTSTATUS
ZSPI-TKN-ENDLIST
Conditional Tokens
ZFIL-TKN-STACKBASE
ZFIL-TKN-SREGISTER
ZFIL-MAP-CHECKPOINTCELL
1 10 File-System Errors
file-system error number
primary stopped
primary abnormally ended
primary's processor failed
primary called CHECKSWITCH
error in stack-base parameter
error in word[n-2];refer to the Guardian Procedure Calls Reference Manual for more
information
token-type ZSPI-TYP-LIST.
token-type ZSPI-TYP-ERROR.
token-type ZSPI-TYP-ENUM.
token-type ZSPI-TYP-INT.
token-type ZSPI-TYP-SSCTL.
token-type ZSPI-TYP-UINT.
token-type ZSPI-TYP-UINT.