Error Lists - HP Guardian Errors Manual

Recovery Either correct the coding error, use nld utility to add the data to the data area or user
library, or refer the call to the data that is already present in the application program.
119
Cause The error returned in error.<0:7> is too large to fit into one byte.
Effect No process is created.
Recovery Instead of the error parameter, specify the errinfo parameter, which is a two-word
parameter, to obtain complete error information.
3xx
Cause The call contained an invalid file format on shared run-time library (SRL) number xx. This
error is returned in the errinfo parameter, the second word of which contains the error subcode.
See "Error Subcodes for Process Creation Errors 12, 13, 70, 76, 84, and 3xx" (page
Effect No process is created.
Recovery Use the original object files and the nld utility to re-create the program file. If the error
recurs, contact your service provider.
5xx
Cause There was a file-system error on shared run-time library (SRL) number xx. This error is returned
in the errinfo parameter, the second word of which contains the error subcode.
Effect No process is created.
Recovery Refer to
parameter. If the problem persists, contact your service provider.

Error Lists

If you are using the Subsystem Programmatic Interface (SPI) to send commands to a subsystem,
you might receive a NEWPROCESS or NEWPROCESSNOWAIT error list in a response. HP
subsystems return such an error list when, in performing your request, they call the NEWPROCESS
or NEWPROCESSNOWAIT procedure directly or indirectly and an error occurs on the call.
The contents of the error list depend on which procedure was called. The standard SPI token
ZSPI-TKN-PROC-ERR, which is present in every NEWPROCESS and NEWPROCESSNOWAIT error
list, identifies the procedure: its value is either ZGRD-VAL-NEWPROCESS (3) or
ZGRD-VAL-NEWPROCESSNOWAIT (4).
Each error list always includes the unconditional tokens listed under its description in this subsection.
In addition, each error list could include any of the conditional tokens listed under its description.
If you are designing a subsystem that uses SPI, follow these guidelines when constructing a
NEWPROCESS or NEWPROCESSNOWAIT error list:
Include all unconditional tokens listed in the error list description.
Optionally include any or none of the conditional tokens listed in each error-list description.
This subsection does not discuss the mechanics of error-list construction. For information about
creating error lists, additional information about tokens token types, and definitions of tokens whose
names begin with ZSPI-, refer to the SPI Programming Manual.
154 NEWPROCESS AND NEWPROCESSNOWAIT Errors
(%073400) ERROR NUMBER RETURNED IS TOO LARGE
SRL HAS INVALID FILE FORMAT
FILE-SYSTEM ERROR ON SHARED RUN-TIME LIBRARY (SRL)
NUMBER XX.
"File-System Errors" (page 19) for corrective action for error number errinfo
161).