HP Guardian Errors Manual page 70

Procedure errors and messages manual
Table of Contents

Advertisement

Recovery Update the application to use an interface supporting the full range of alternate key
information, for instance by using FILE_GETINFOLIST_ item 106
583
Cause The specified extent size is too large or a maxextents value bigger than 16 is specified for
a non-key sequenced partitioned file. Usually this error occurs because an extent size of more than
65,535 pages is specified for a format 1 file. The extent size in question might be the primary or
secondary extent size of a file, or it might be any of the extent sizes specified in the partition
description.
Effect The requested operation is not performed.
Recovery For the extent size problem, reduce the extent size or arrange the conversion of the file
into format 2, which can handle larger extent sizes than format 1 files can. For the partitioned
maxextents problem, avoid using a maxextents value greater than 16.
584
Cause The operation could not be performed because a software component does not support
format 2 disk files. The component may be local to the caller or may be on a remote system if a
remote object is being manipulated.
Effect The requested operation is not performed.
Recovery Check the software versions on the local system and, if applicable, the remote system to
determine which component does not provide support for format 2 files. Some subsystems, such
as optical disk, might not have a version available which can support format 2 files. There might
also be down-level version disk volume references in partition and alternate key descriptions.
Upgrade the necessary systems, or move the objects to a systems supporting format 2 files.
590
Cause A parameter value is not valid, or two parameter values are not compatible. Error 590 is
returned when no specific error applies to the problem.
Effect The operation failed.
Recovery The value of the parameter must be an acceptable value. Correct the problem and try
again.
593
Cause The request was abandoned.
Effect The operation failed.
Recovery Informational message only; no corrective action is needed.
594
Cause DSM/TC returned a fatal error to $ZSVR.
Effect The tape request failed.
70
File-System Errors
(%1107)
The extent size specified is too large or
the maxextents limit is too large.
(%1110)
The operation could not be performed because a
software component does not support format 2
disk files.
(%1116)
The parameter value is invalid or
inconsistent with another.
(%1121)
The request was cancelled.
(%1122)
A DSM/TC error was returned to $ZSVR.
Refer to the EMS log for detailed information.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Guardian

Table of Contents